This
inspection applies to: all machines except those which either
have no front or rear position lamps or have such lamps permanently
disconnected, painted over or masked that are
. only used during daylight hours, and
. not used at times of seriously reduced visibility
If this situation occurs the machine presenter should be issued
with an advisory notice recording the above and it should
also be recorded on the carbon copy of the VT20.
Statutory reflectors
Mopeds and motor bicycles require one unobscured red reflector
which is aligned to the vehicles longitudinal centre line
and is positioned to reflect squarely to the rear. If the
motorcycle is fitted with a side car the side car will also
require a reflector fitted towards the nearside and positioned
to reflect squarely to the rear.
Extra reflectors
fitted to a motorcycle are
not included in this inspection.
Reflecting and Retroreflective tape
must NOT be regarded as a substitute for an obligatory reflector.
|
1.
Check the presence and colour of the rear reflector (two in
the case of a motorcycle combination, one on the motorcycle
and the other on the side car), (see information column).
2. Examine the reflectors) for condition. security position
and that it is not
obscured.
|
1.
There is not one unobscured RED reflector (in the case of
a motorcycle combination one on the machine and one on the
side car) positioned to reflect squarely to the rear
2. A reflector
a. so damaged, dirty or deteriorated that its function is
impaired
b. obscured
c. insecure
d. obviously incorrectly positioned
|
