This inspection applies to; all machines except those which
have neither front nor rear position lamps, or has such lamps
permanently disconnected, painted over or masked that are
(see 1.1).
Exemptions
For this test if a stop lamp is fitted, it must meet the requirements
of this inspection, but need not be fitted to a machine which:
a. cannot exceed 25mph, or
b. was first used before 1 January I936.or
c. was first used before 1 April 1986 and which has an engine
capacity of less than 50cc.
Operation
Stop lamps may operate in conjunction with either the front
or the rear brake, or both. On machines first used on or after
1 April 1986, the stop lamps must operate by the application
of each system.
On machines without a battery or with an insufficiently charged
battery, it will be necessary to run the engine.
|
1. Apply each of the brakes in turn and check the colour and
functioning of the stop lamp. (see information column).
2. Check that the illumination of the lamp is not affected
by the operation of any other lamp or the horn.
3. Check the condition and security of the stop lamp (see
information column),
|
1. A stop lamp
a. does not illuminate immediately a brake applies
b. emits other than a steady red light
c. that is obscured
d- flickers when tapped lightly by hand
e. remains on when the brake is released.
2. The illumination of the stop lamp is
affected by the operation of another lamp or the horn.
3. A stop lamp
a. missing or so damaged or deteriorated that its function
is impaired
b. insecure.
|
