The MOT Test

MOT Test Procedures

Test Procedures
What the MOT Test consists of. Step by step guide on how the MOT Test will proceed

Avoid MOT Failures

MOT Faliures
How to avoid MOT Failures.
Tips and advice
Failure Statistics

Common Failures

Failure Statistics
The most common reasons for an MOT Failure. Statistics can help you know what to look for in your vehicle

Bike Basics

Motorbike MOT Test
Quick guide for a once over that everyone should do before putting your bike through its MOT test

MOT Exemption List

MOT Exemption
Not all vehicles are required to have an MOT certificate. Check out the exmption list to see if you need to worry.

Re-tests & Appeals

MOT Failure Appeals
What to do if your vehicle fails its MOT. What qualifies for a free re-test? How to make an appeal and download the Appeal Form

Pre MOT Check

MOT Checks
Checks that you can make yourself to improve the chances of an easy MOT pass

Check MOT Online

Online MOT Check
Check your MOT certificate Details online. Make sure that your MOT is still valid

MOT Costs

MOT Costs
The latest Fees for an MOT test for all types of vehicle

Expired MOT

MOT Expired
The police now have computers in their cars which can tell them instantly if your insurance, tax and now MOT is out of date

Tyre Failure Rates

MOT Failure statistics
The latest figures, released by the Department of Transport, of failure rates in the UK for tyres.

Northern Ireland MOT Test

MOT testing in Northern Ireland
The Procedures for MOT testing in Northern Ireland is different to mainland UK. This section explains how and when you need to MOT your Vehicle in Northern Ireland


MOT Test

Whats tested

1. About the MOT

The MOT tests some important items on your vehicle to check that they meet the legal standards.

It isn’t the same as having your vehicle serviced and doesn’t check its general mechanical condition.

The test doesn’t cover the condition of the:• engine

• clutch

• gearbox
2. Car parts tested in the MOT

These are some of the important parts of your car that will be checked in the MOT.

Parts checked in the MOT

2.1 Body, vehicle structure and general items

These will be inspected to check that:• they’re free from excessive corrosion or damage in specific areas

• there are no sharp edges likely to cause injury
2.2 Towbars

Towbars will be inspected for:• secureness

• condition

• inappropriate repairs or modification
The MOT tester will also check that:• the 13 pin electrical socket is working correctly

• the speedometer is in good working order

• the engine mountings are secure
2.3 Fuel system

The fuel system will be inspected to check that:• there are no leaks

• the pipes and hoses are secure and in a good condition

• the fuel cap fastens and seals securely

You should make sure that the key is available as the fuel cap will need to be opened.
2.4 Exhaust emissions

The vehicle will be inspected, depending on the age and fuel type of the vehicle, to check that it meets the rules for exhaust emissions.

Diesel vehicles

The MOT tester will refuse to test your vehicle if they think that the smoke test may damage your engine.

You should tell them at the start of the MOT if you think this may happen.

To reduce the possibility of damage and increase the chances of passing, you should:• keep your vehicle maintained at all times

• have the camshaft drive belt replaced at the recommended intervals

• go for the MOT with a fully warmed up engine - it will produce less smoke and is safer to test

• not tamper with the governor settings
2.5 Exhaust system

The exhaust system will be inspected to check that:• it’s secure and complete

• a catalyst isn’t missing where one was fitted as standard

• it’s without serious leaks and not too noisy
2.6 Seatbelts

The vehicle will be inspected to check that:• the mandatory seatbelts are in place

• they are suitable for the vehicle

• they are in a good condition

• they work properly

• they are attached securely
The malfunction indicator lamps (MILs) or dashboard warning lights will be checked for the:• air bags

• seatbelt pretensioners (which remove the slack from a seatbelt in the event of a collision)

• seatbelt load limiters (which release a small amount of belt when it’s too tight)
2.7 Seats

These will be inspected to check that: • the driver’s seat can be adjusted

• all seats are securely fitted and that seat backs can be fixed in the upright position
2.8 Doors

These will be inspected to check that:• the latch is secure in the closed position

• the front doors open from inside and outside the vehicle

• the rear doors open from outside the vehicle

• hinges and catches are secure and in a good condition
2.9 Mirrors

The vehicle will be inspected to check for the minimum number of mirrors, their condition and security. Indirect vision devices will also inspected.

2.10 Load security

The vehicle will be inspected to check that the boot or tailgate can be closed properly.

2.11 Brakes

These will be inspected to check:• their condition, including inappropriate repairs or modifications

• their operation and performance (the efficiency test) - the wheels and trims aren’t removed as part of the test

• the anti-lock braking system (ABS) and electronic stability control (ESC) (where fitted)

The MILs or dashboard warning lights will also be checked for the ABS, ESC, electronic park brake and brake fluid warning lights.
2.12 Tyres and wheels

These will be inspected to check for:• condition

• security

• tyre size and type

• tread depth

Spare wheels and tyres are not inspected.

Vehicles first used on or after 1 January 2012 will be checked to make sure the tyre pressure monitoring system (TPMS) MIL is working.
2.13 Registration plates

These will be inspected to check for:• condition

• secure attachment

• colour

• characters correctly formed and spaced
2.14 Lights

These will be inspected to check:• their condition

• operation, including high intensity discharge (HID) and light emitting diode (LED)

• the headlamps for cleaning, self levelling and security

• headlamp aim

• main beam warning light working
2.15 Bonnet

This will be inspected to check that it closes securely.

2.16 Wipers and washers

These will be inspected to check that they work properly so the driver has a clear view of the road.

2.17 Windscreen

The windscreen will be inspected to check for:• condition

• the driver’s view of the road
2.18 Horn

This will be inspected to check:• that it works properly

• it’s suitable for the vehicle
2.19 Steering and suspension

These will be inspected to check:• their condition

• steering oil level

• they work correctly

• for inappropriate repairs or modification including corrosion to power steering pipes or hoses

• that the steering lock mechanism works properly

The MILs or dashboard warning lights will also be checked for the electronic power steering and steering lock.
2.20 Vehicle identification number (VIN)

The VIN will be on vehicles first used on or after 1 August 1980. Your car will be inspected to check that a single VIN is displayed, except on multistage build vehicles (eg van conversion, BMW, Alpina etc).

2.21 Electrical

Visible electrical wiring and the battery will be checked.

We and our third party partners use technology such as cookies on our site. This is to give you a better experience, analyse how you and other visitors use this website and show you relevant, tailored advertisements. By using this website you agree to the use of cookies. You can read our Cookies Policy using the link in the footer of this page.

Accept Cookies